FJR1300 84,000 Mile Maintenance Schedule

Index   Home

This is a custom checklist specific for the 84,000 mile (134,400 km) maintenance. It combines the emission control system and general maintenance and lubrication schedules from the FJR1300 Owners Manual. Note: the FJR1300 SERVICE MANUAL with the white cover is missing a bunch of service items, apparently the version with the blue cover is correct. They both have the same part and edition numbers.

Many of us perform our own service, and this page is a useful checklist for that as well, to make sure we don't forget anything. Note that Yamaha recommends that you have your dealer perform these service items, as many require special tools and knowledge.

Several items are time based, or also have time limits, rather than being solely mileage based. For instance:

Service date: Mileage: Performed by:


Spark plugs
  • Check condition
  • Adjust gap and clean
Crankcase ventilation system
  • Check ventilation hose for cracks or damage
  • Replace if necessary
Fuel line
  • Check fuel hoses and vacuum hose for cracks or damage
  • Replace if necessary
Muffler and exhaust pipe
  • Check for leakage
  • Tighten if necessary
  • Replace gasket(s) if necessary
Electronic fuel injection
  • Check and adjust engine idle speed and syncronization
Engine Oil
  • Replace with 20w40 (API SE), warm engine before draining
Air filter element
  • Replace
  • Check condition and/or clean
Cooling system
  • Check hoses for cracks or damage
  • Replace if necessary
  • Replace w/ethylene glycol anit-freeze coolant every 2 years
Brake system
  • Check operation, pad wear, and fluid leakage
  • Correct if necessary
Clutch
  • Check operation and for fluid leakage
  • Correct if necessary
Control cables
  • Apply chain & cable lube or 10w30 engine oil thoroughly
Shock absorber assembly
  • Check operation and for oil leakage
  • Replace if necessary
Front fork
  • Check operation and for oil leakage
  • Repair if necessary
Steering bearings
  • Check bearing assembly for looseness
  • Moderately repack w/lithium-soap based grease
Brake and clutch lever pivot shafts
  • Apply lithium-soap based grease lightly
Brake and shift pedal pivot shafts
  • Apply lithium-soap based grease lightly
Wheel bearings
  • Check bearings for smooth operation
Sidestand pivot
  • Check operation
  • Apply chain lube or lithium-soap based grease lightly
Sidestand switch
  • Check and clean or replace if necessary
Chassis fasteners
  • Check all chassis fittings and fasteners
  • Correct if necessary
Brake hoses
  • Check for cracks or damage
  • Replace every 4 years or if cracked or damaged
Wheels
  • Check runout and for damage
Tires
  • Check tread depth and for damage
  • Replace if necessary
  • Check air pressure
  • Correct if necessary

Copyright © 2002, by H. Marc Lewis. All rights reserved.